TSP 310 - Sanding guide black 400ml
TSP 310
This unique product boasts an extraordinary composition, allowing it to be sanded after just 3 seconds at 20 °C without clogging the sanding paper. Unlike many comparable products on the market, our Sanding Guide eliminates the need for extra abrasive consumption. Choose the innovation that sets you apart – available in both sleek black and vibrant green.
Key features
-
- • Black & fluo green
-
- • Unique product ! Thanks to unique composition this sanding guide can be sanded after 3 seconds at 20 °C without filling the sanding paper. Contrary to most comparable products in the market this product causes no extra abrasive consumption.
Product details
- Brand
- Finixa
- Number
- TSP 310
- Colour
- Black
- Weight (cm)
- 0.387
- Dry storage
- yes
- Maximum storing temperature
- 25 °C
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 12
- Units for pallet
- 672
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- no
- Base ingredient(s)
- nitrocellulose
- Coverage
- 10 m²/L
- Dry layer film thickness
- 10 µm
- Gloss level
- 0 %
- Lead-free
- yes
- Particle size
- 40 µm
- Pressure
- 3.1 bar
- Propellant
- butane propane
- Recommended number of layers
- 1-2
- Solid content
- 13.3 g/ml
- Solvents
- yes
- Type
- aerosol
- VOC
- 636 g/L
- Volume
- 0.4 L
- Workable surface state
- dry
Application
-
TSP 310 – 320 Application - Directions for Use:
- Surface Preparation: Ensure the surface is clean, dry, and free from grease or loose material.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Application: Hold the can 8-12 inches away from the surface and apply a light, even coat.
- Drying: Allow a few minutes for the guide coat to dry to the touch.
- Sanding: Once dry, sand the area as usual; the guide coat will highlight imperfections and high spots.
- Clean Nozzle: Invert the can and spray for 2-3 seconds to clear the nozzle.