TSP 100 - Prefill solvent 400ml
TSP 100
This innovative product allows for easy transfer of paint via a filling device into the can, creating a ready-to-use end product. The adaptable spray nozzle offers options for both horizontal (spray gun effect) and round (for closed parts) alignments of the spray pattern. Experience a higher spray rate and increased working speed, making it ideal for efficient spot repairs.
Key features
-
- • Is pre-filled with propellant compatible with most brands of solvent-based paints.
-
- • The paint is transferred via a filling device into the can to produce a ready-to-use end product (dealers liability).
-
- • Adaptable spray nozzle for horizontal (spray gun effect) to round (for closed parts) alignment of the spray pattern.
-
- • Higher spray rate and higher working speed.
-
- • Ideal for spot repair.
Product details
- Brand
- Finixa
- Number
- TSP 100
- Colour
- Transparent
- Dry storage
- yes
- Minimum storing temperature
- 25 °C
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 12
- Units for pallet
- 672
- Base type
- Solvent-Based
- Lead-free
- yes
- Pressure
- 5.5 bar
- Propellant
- dimethyl ether
- Solid content
- 0 g/ml
- Type
- aerosol
- VOC
- 669 g/L
- Volume
- 0.260 L
- Workable surface state
- dry
Application
-
TSP 100 – 900 application - Directions for use
- Aerosol preparation: Fill the aerosol with the desired paint (TSP 100: Solvent based – TSP 900: waterbased).
- Surface Preparation: Clean the surface to remove any grease, wax, or dirt. For best results, lightly sand the area.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Test Spray: Apply a small amount on a test surface to check compatibility and colour match.
- Apply: Spray in smooth, sweeping motions about 20cm – 30cm (8-12 inches) from the surface.
- Dry Time: Allow at least 10 minutes between coats and 24 hours for full cure.
- Clear Coat: For added protection and gloss, apply a compatible 1K or 2K clear coat.
- Nozzle Maintenance: Clear the nozzle by inverting the can and spraying for a few seconds.