TSP 030 - Adhesion primer 400ml
TSP 030
Our Adhesion Primer is a reliable adhesion promoter specially formulated for use on various plastics. With just one light coat, it ensures excellent adhesion, and its fast-drying formula allows for quick application. You can paint over it after just 15 minutes, making it a convenient and effective solution for your priming needs.
Key features
-
- • Adhesion promotor to be used on most plastics
-
- • Spray one light coat
-
- • Excellent adhesion
-
- • Fast drying
-
- • Paintable after 15 minutes
Product details
- Brand
- Finixa
- Number
- TSP 030
- Colour
- Transparent
- Shelf life
- 24 months
- Dry storage
- yes
- Maximum storing temperature
- 25 °C
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 12
- Units for pallet
- 672
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- no
- Application surfaces
- galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint ceramic copper lead stainless steel high-pressure laminate polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene thermosetting composites carbon fiber thermoplastics coated metals
- Base ingredient(s)
- polyolefine resin
- Coverage
- 6 m²/L
- Dry layer film thickness
- 200 µm
- Gloss level
- 0 %
- Lead-free
- yes
- Maximum processing temperature
- 30 °C
- Minimum processing temperature
- 10 °C
- Paint type
- water-based solvent-based
- Pressure
- 3.8 bar
- Propellant
- dimethyl ether
- Recommended number of layers
- 1-2
- Resprayable after
- 15 minutes
- Solid content
- 1.6 g/ml
- Solvents
- yes
- Time until paintable
- 15 minutes
- Type
- aerosol
- VOC
- 714 g/L
- Volume
- 400 cl
- Workable surface state
- dry
Application
-
TSP 030 application - Directions for use
- Surface Preparation: Clean the surface to remove any contaminants like dirt, oil, or grease.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Apply: Hold the can 20cm – 30cm (8-12 inches) away from the surface, and apply a light, uniform coating.
- Dry: Allow 5-10 minutes for the product to become touch dry.
- Topcoat Application: Apply your primer, paint, or clear coat within 30 minutes for optimal results.