TSP 180 - 1K Clear coat 400ml
TSP 180
This clear coat is designed for easy application with constant atomization pressure, providing a smooth and even finish. Achieve a high gloss level, excellent flow, and good surface hardness. Resistant to petrol, chemicals, and weather influences, it ensures durability and UV resistance. The non-fading formula and easy polishability make it a top choice. For seamless blending, use it with our TSP 920 Fade-Out Thinner.
Key features
-
- • Fast drying, high-quality professional 1K clear coat in aerosol
-
- • Easy application, constant atomization pressure
-
- • Very good flow
-
- • High gloss level
-
- • Good surface hardness
-
- • Resistant to weather influences
-
- • Non-fading and UV resistant.
-
- • Very good polish ability
-
- • No colour deviation
Product details
- Brand
- Finixa
- Number
- TSP 180
- Colour
- Transparent
- Dry storage
- yes
- Maximum storing temperature
- 25 °C
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 12
- Units for pallet
- 672
- 1K product
- yes
- 2K product
- no
- Base ingredient(s)
- acrylic resin nitrocellulose
- Coverage
- 4 m²/L
- Dry layer film thickness
- 25 µm
- Gloss level
- 75 %
- Lead-free
- yes
- Pressure
- 4.0 bar
- Propellant
- dimethyl ether
- Solid content
- 9.8 g/ml
- Solvents
- yes
- Workable surface state
- dry
Application
-
TSP 180 application - Directions for use:
- Surface Preparation: Ensure the base coat is fully dry and free of dust, grease, and contaminants.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Test Spray: Perform a test spray on an inconspicuous area or spray card to ensure paint compatibility.
- Spray: Hold the can approximately 20cm – 30cm (8-12 inches) from the surface and apply 2-3 light coats in a sweeping motion.
- Drying: Allow a minimum of 10-15 minutes between coats and at least 24 hours for full cure.
- Polish: Optionally, buff and polish for an extra glossy finish.
- Nozzle Maintenance: Clear the nozzle by inverting the can and spraying for a few seconds.