TSP 210 - Spray anti-gravel grey 400ml
TSP 210
Key features
-
- • Anti-gravel is available in light grey and black, supplied with a round thick spray jet to apply the viscous product in thicker layers.
-
- • To get a composition of layers: apply layers crosswise at a distance of 35cm.
-
- • Shortening the distance provides a more glossy result.
-
- • Can be overpainted with most 1K & 2K paints.
Product details
- Brand
- Finixa
- Number
- TSP 210
- Colour
- grey
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 672
- Storing condition
- dark
- Dry storage
- yes
- Freezing resistant
- yes
- Maximum storing temperature
- 25 °C
- Minimum Order Quantity
- 12
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- yes
- Base ingredient(s)
- titanium dioxide carbon black synthetic resin rubber
- Coverage
- 2 m²/L
- Dry layer film thickness
- 150 µm
- Gloss level
- 0 %
- Lead-free
- yes
- Particle size
- 100 µm
- Pressure
- 4.9 bar
- Propellant
- propane
- Recommended number of layers
- 2-3
- Solid content
- 30.2 g/ml
- Solvents
- yes
- Type
- aerosol
- VOC
- 544 g/L
- Volume
- 0.4 L
- Workable surface state
- dry
Application
-
TSP 1500 application - Directions for use:
- Surface Preparation: Clean the surface to remove dust and/or grease. Sand with P180 – P220 for better adhesion.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Test Spray: Apply to a test area to ensure compatibility and desired texture.
- UV-Curing: Leave +-30 seconds flash off before curing, expose the coated area to 7mw/cm² for 3-5 minutes or as manufacturer guidelines to cure. Finixa UVL 00: 1 layer or 3 layers: 45 – 60 seconds full exposure 2 layers : 60 – 90 seconds full exposure
- Top Coating: Once fully cured, the surface is ready for top coating or further preparation.
- Nozzle Maintenance: Invert the can and spray for 2-3 seconds to clear the nozzle.
- 1- layer: Spray a full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- 2- layers: Spray a full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- Flash off for +-10 seconds Spray a 2nd full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- 3- layers: Spray a full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes,
- Flash off for +-10 seconds
- Spray a 2nd full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- Flash off for +-20 seconds
- Intermediate curing 90 seconds with at 7mw/cm² at 395nm (60 seconds with Finixa UVL 00)
- Spray a 3rd full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
Downloads
Language
| Name | Asset Type | Language | File type | Download |
|---|---|---|---|---|
| TSP 210 - SDS - EN.pdf | SDS | English | 301 KB | |
| TSP 210-230 - TDS - Finixa - EN.pdf | TDS | English | 104 KB | |
| TSP 210 - SDS - NL.pdf | SDS | Nederlands | 307 KB | |
| TSP 210-230 - TDS - Finixa - NL.pdf | TDS | Nederlands | 108 KB | |
| TSP 210 - SDS - ES.pdf | SDS | Español | 307 KB | |
| TSP 210-230 - TDS - Finixa - ES.pdf | TDS | Español | 102 KB | |
| TSP 210 - SDS - DE.pdf | SDS | Deutsch | 309 KB | |
| TSP 210-230 - TDS - Finixa - DE.pdf | TDS | Deutsch | 127 KB | |
| TSP 210 - SDS - FR.pdf | SDS | Français | 354 KB | |
| TSP 210-230 - TDS - Finixa - FR.pdf | TDS | Français | 110 KB |