TSP 710 - 2k clear coat 250ml
TSP 710
Tailored for professional users seeking a SMART repair solution. Achieve a flawless finish with ease by applying two layers with a quick 10-minute interval. This clear coat provides superior resistance against petrol and UV exposure, ensuring long-lasting durability without succumbing to weather influences.
Key features
-
- • 2K clear coat for the professional user: a SMART repair solution.
-
- • Apply 2 layers with an interval of 10 minutes to get the perfect spray gun finish, which is scratch free.
-
- • Petrol- and UV-resistant
-
- • Suffers no weather influences.
Product details
- Brand
- Finixa
- Number
- TSP 710
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 6
- Units for pallet
- 696
Application
-
Application TSP 710 - Directions for Use:
- Surface Preparation: Clean the surface thoroughly to remove any contaminants. Lightly sand (clear coat prep) better adhesion.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Activate: Activate the aerosol by pushing the pin on the bottom using the cap, make sure you push down on a flat surface.
- Shake Well: Shake vigorously for at least two minutes to mix the components.
- Test Spray: Apply to a test surface to evaluate compatibility and finish.
- Application: Hold the can 20cm – 30cm (8-12 inches) away from the surface and apply 2-3 light coats, allowing flash-off time of 5 – 10min between layers.
- Drying Time: Allow to cure for at least 24 hours for full hardness.
- Nozzle Maintenance: Invert can and spray for 2-3 seconds to clear nozzle.