CBP - Spray booth protect pro
CBP 05-25
Protect your spray booth walls with this transparent, tacky, and washable coating
It traps dust, applies easily in a single layer, and removes with water. Biodegradable and long-lasting, it shields for 10-12 weeks per 12 liters, varying by temperature and humidity. Reapply as needed. Per can.
Spray booth protect basicis a waterbased dispersion that complies with environmental norms, security & health standards. This product is stabilized with a system of biodegradable surface active substances and contains no plasticizers.
The product is only used on hardened undergrounds as sticky coating. Specific application on walls of spraybooths existing in aluminium/inox, galvanised and varnished walls.
Key features
- Transparant, tacky and washable coating for the protection of spraybooth walls against overspray. Product stays tacky in order to hold on to swirling dust
- Apply one thick layer by means of a pressure tank, airmix in 1 thick layer
- Remove afterwards with water and sponge
- Biodegradable
- Remove or apply another coat when the product is no longer tacky
- Average consumption per spraybooth: 12L
- Depending on temperature and humidity, the product will stay tacky for 10-12 weeks
- Number of layers (min-max): 1/3
- Coverage: 10m²/L/layer
- Can be applied over 2 dried layers of powerpeel for easy removal
Product details
- Brand
- Finixa
- Number
- CBP 05-25
- Shelf life
- 24 months
- Storage temperature
- Max storage temperature 40°C
- Storage conditions
- Avoid high fluctuation in temperature
- Storing condition
- away from direct sunlight
- Freezing resistant
- no
- Application areas
- walls
- Film
- transparent, sticky
- Heat resistance
- 67 C°
- PH-value
- +/- 8-9
- Removal
- washable
- Return
- 15 to 20m² / liter/layer
- Specific weight (g/L)
- 1,05 g / cm³
- Tacky
- yes
- Viscosity
- standard 900-1000 cps with SP5 / 100T/min Brookfield RVT
Application
-
CBP applicationDirections for use with spray gun:
- Use a 1.8 - 2.5 nozzle. Spray pressure: 2-3 bar.
- Layer thickness: 125 mμ. The layer thickness determines how fast the product dries out.
- For an optimal application we recommend to apply the product in 3 layers. After applying a layer wait 20 minutes before applying another.
- Cabin 7 x 4 x 3: average consumption 15L
- To prevent the coating from dripping, apply a thin smooth layer on vertical surfaces.
- Apply using a pressure tank (e.g. SPG 80) equipped with a 2.0–2.5 mm nozzle. Set the pressure in the tank to 2.0–2.5 bar.
- Do not dilute the product.
- Apply in one continuous, closed coat. When the applied layer starts to dry, an additional coat can be applied. A maximum of three coats may be applied in total.
- Clean tools and equipment immediately after use with warm water and a sponge, optionally with a drop of liquid soap, or by using a high-pressure cleaner.
Downloads
Language
| Name | Asset Type | Language | File type | Download |
|---|---|---|---|---|
| CBP_FINIXA_SDS_SE.pdf | SDS | Svenska | 1368 KB | |
| CBP_FINIXA_SDS_EN.pdf | SDS | English | 1363 KB | |
| 09 Product comparison.pdf | Product_comparison | English | 98 KB | |
| CBP_FINIXA_SDS_NL.pdf | SDS | Nederlands | 1372 KB | |
| 09 Productvergelijking.pdf | Product_comparison | Nederlands | 98 KB | |
| CBP_FINIXA_SDS_IT.pdf | SDS | Italiano | 1372 KB | |
| CBP_FINIXA_SDS_DE.pdf | SDS | Deutsch | 1377 KB | |
| 09 Produktvergleich.pdf | Product_comparison | Deutsch | 99 KB | |
| CBP_FINIXA_SDS_ES.pdf | SDS | Español | 1375 KB | |
| 09 Comparación de productos.pdf | Product_comparison | Español | 100 KB | |
| CBP_FINIXA_SDS_FR.pdf | SDS | Français | 1374 KB | |
| 09 Comparaison des produits.pdf | Product_comparison | Français | 100 KB | |
| CBP_FINIXA_SDS_FI.pdf | SDS | Suomalainen | 1369 KB | |
| CBP_FINIXA_SDS_PL.pdf | SDS | Polski | 1380 KB | |
| CBP_FINIXA_SDS_PT.pdf | SDS | Portuguese | 1375 KB | |
| CBP_FINIXA_SDS_NO.pdf | SDS | Norsk | 1370 KB | |
| CBP_FINIXA_SDS_DK.pdf | SDS | Dansk | 1370 KB |