CBP P - Spray booth protect performance
CBP 05P-25P
Transparent, tacky, and washable coating for spray booth walls
Transparent protection coating (waterborn). Forms a static coat to collect en keep dust particles and paint overspray. Washable with water. Depending on ambient conditions such as temperature and humidity the product may remain tacky for 6–8 weeks. Per can.
Spray booth protect basicis a waterbased dispersion that complies with environmental norms, security & health standards. This product is stabilized with a system of biodegradable surface active substances and contains no plasticizers. The product is only used on hardened undergrounds as sticky coating. Specific application on walls of spraybooths existing in aluminium/inox, galvanised and varnished walls.
Key features
- Transparant, tacky and washable coating for the protection of spraybooth walls against overspray. Product stays tacky in order to hold on to swirling dust.
- Apply with spray gun (2.5) in two or three coats. The thicker the total coat, the longer it stays active. Applying another coat after some time will re-activate the product.
- Remove afterwards with water and sponge.
- Biodegradable.
-
- Average consumption per spraybooth: 15L.
- Depending on temperature and humidity, product will stay tacky for 6 - 8 weeks.
- Can be applied over 2 dried layers of powerpeel for easy removal
- Number of layers (min-max): 2/4
Product details
- Brand
- Finixa
- Number
- CBP 05P-25P
- Shelf life
- 24 months
- Storage temperature
- Max storage temp 40°C
- Storage conditions
- Avoid high fluctuation in temperature
- Storing condition
- away from direct sunlight
- Freezing resistant
- no
- Application areas
- walls
- Film
- transparent, sticky
- Heat resistance
- 67 C°
- PH-value
- +/- 8-9
- Removal
- washable
- Return
- 15 to 20m² / liter/layer
- Specific weight (g/L)
- 1,03 g / cm³
- Tacky
- yes
- Viscosity
- standard 900-1000 cps with SP5 / 100T/min Brookfield RVT
Application
-
CBP P applicationDirections for use with spray gun:
- Use a spray gun with nozzle 1.8 – 2.5mm. Spraying pressure should be at 2-3 bar.
- Layer thickness: 125 mμ. The layer thickness determines how fast the product dries out.
- For an optimal application we recommend to apply the product in 3 layers. After applying a layer wait 20 minutes before applying another.
- Cabin 7 x 4 x 3: average consumption 15L
- To prevent the coating from dripping, apply a thin smooth layer on vertical surfaces.
- Apply using a pressure tank (e.g. SPG 80) equipped with a 2.0–2.5 mm nozzle. Set the pressure in the tank to 2.0–2.5 bar.
- Do not dilute the product.
- Apply in one continuous, closed coat. When the applied layer starts to dry, an additional coat can be applied. A maximum of three coats may be applied in total.
- Clean tools and equipment immediately after use with warm water and a sponge, optionally with a drop of liquid soap, or by using a high-pressure cleaner.