CPP 17 - Cabin Protect peelable 17l
CPP 17
Our white, peelable coating offers effective protection for spray booth walls against overspray. Apply it with a spray gun (2.5mm nozzle) in 2 to 3 coats. For optimal results, add an extra coat after contamination to save time and facilitate easy removal in one piece as it thickens. It's biodegradable and a water-based product, ensuring eco-friendly protection for your spray booth.
Key features
-
- • White, peelable coating for the protection of spraybooth walls against overspray.
-
- • Apply with a spraygun (2.5) in 2 to 3 coats.
-
- • After contamination, it is best to put an extra coat on and repeat, this will save time and makes it easier to peel off the coating in one piece once it has reached a certain thickness.
-
- • Biodegradable.
-
- • Number of layers (min-max): 2-15
-
- • Coverage: ±5,5m²/L/layer
-
- • Drying time: 15 min. 60°
-
- • Removal: peeling
-
- • Water-based product.
Product details
- Number
- CPP 17
- Colour
- white
- Freezing resistant
- no
- Product weight
- 16790 g
- Shelf life
- 24 months
- Application areas
- interior walls lighting
- Coating lifespan
- 356 days
- Consumption rate
- 5.5 L/m²
- Drying duration
- 180 minutes
- Height
- 27.6 cm
- Length
- 33.5 cm
- Maximum drying temperature
- 60 °C
- Maximum number of layers
- 15
- Maximum temperature resistance
- 80 °C
- PH-value
- 10
- Removal
- peelable
- Tacky coating
- no
- Type
- bucket
- Volume
- 17 L
- Wet film thickness
- 100 µm
- Width
- 33.5 cm
- Storing condition
- dark
- Units for pallet
- 24
- Sales unit
- 1
Application
-
CPP applicationSpray gun with nozzle 2.5mm, at a pressure of 2.0-2.5 bar:
- Stir product firmly.
- Fill the paint cup of spray gun.
- Apply the product to the surface.
- Clean spray gun with water.
- Stir product firmly.
- Take a paint tray, and saturate the paint roller with CPP.
- Apply the product to the surface.
- Clean paint roller with water.
- Stir product firmly.
- Fill the pressure tank with CPP (use MCP 5000 for easy cleaning).
- Regulate product and air flow on the pressure tank.
- Apply the product to the surface.
- Clean pressure tank with water.