SPSD 0100 - Sanding strip-paper-115x230mm 10 holes P100 100p.
SPSD 0100
Sanding strip with double-glued layers and blue fired aluminum oxide grit enriched with diamond powder, it ensures fast, sharp, and long-lasting sanding. This strip delivers efficient results, making it an essential tool for professionals in the industry.
Key features
-
- • 100 strips per box. 50 strips per box for P60
-
- • Stearate hot melted coating avoiding clogging of dust particles
-
- • Uniformed orientation of the grit on the backing
Product details
- Brand
- Finixa
- Number
- SPSD 0100
- Colour
- red
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 8
- Applicable for
- surface preparation
- Application surfaces
- steel; E-coating; galvanized steel; aluminum; Aluminium Rims; fiberglass; hard plastic; soft plastic; new paint; good paint; neglected paint; putty; primer/filler; OEM paint; refinish paint; coated metals
- Carrier
- paper
- Grit size
- 100
- Grit type
- Aluminium oxide
- Length
- 230 mm
- Number of holes
- 10
- Perforated
- yes
- Use
- dry
- Use by hand
- yes
- Width
- 115 mm
Application
-
SPSA-SPSB-SPSC-SPSD application - Directions for useDesigned for dry application with a hand block or DA sander on paints, wood, polyester fillers, and primers. DA sander directions:
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.
Downloads
| Name | Asset Type | Language | File type | Download |
|---|