SPSB 0100 - Sanding strip-paper-70x198mm 8 holes P100 100p.
SPSB 0100
Product details
- Brand
- Finixa
- Number
- SPSB 0100
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Applicable for
- surface preparation
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic new paint good paint neglected paint putty primer/filler OEM paint refinish paint coated metals
- Carrier
- paper
- Grit size
- 100
- Grit type
- aluminium oxide
- Length
- 198 mm
- Number of holes
- 8
- Perforated
- yes
- Use
- dry
- Use by hand
- yes
- Width
- 70 mm
Application
-
SPSA-SPSB-SPSC-SPSD application - Directions for useDesigned for dry application with a hand block or DA sander on paints, wood, polyester fillers, and primers. DA sander directions:
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.