SPDS 0150 - Abrasive red-paper-Ø150mm 0 holes P150 100p.
SPDS 0150
Key features
-
- • Paper disc without holes, available in different grids.
-
- • For old & new paints
-
- • High solid primers & clear coats & polyester putties
-
- • Better performance when no dust extraction is available or necessary as the disc is completely covered with grits
-
- • Double glued layer to avoid detachment of the grit
-
- • Blue fired red aluminium oxide grit partly enriched with diamond based powder, to increase durability
-
- • Uniformed orientation of the grit on the backing, insuring the sharpest point of the grit is making contact with the surface which increases the sharpness and speed during sanding
-
- • Stearate hot melted coating avoids clogging of dust particles into the abrasive, giving it longevity
-
- • Ø 150mm
Product details
- Brand
- Finixa
- Number
- SPDS 0150
- Colour
- red
- Material
- paper
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 8
- Applicable for
- paint removal surface preparation
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene chlorides thermosetting composites carbon fiber thermoplastics coated metals
- Attachment type
- hook and loop
- Carrier
- paper
- Coating
- open
- Diameter
- 150 mm
- Grit size
- 150
- Grit type
- aluminium oxide
- Length
- 150 mm
- Perforated
- no
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric rotating
- Width
- 150 mm
Application
-
SPDA-SPDD-SPDE-SPDS application - Directions for useIntended to be used on a excentric rotating sander. The discs can only be used for dry sanding. For use on paints, wood, polyester fillers, and primers.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.