SPDD 0080 - Abrasive disc Ø125mm 8 holes P80 100p.
SPDD 0080
Sanding discs with double-glued layers and blue fired aluminum oxide grit enriched with diamond powder, it sensures fast, sharp and long-lasting sanding. This disc delivers efficient results, making it an essential tool for professionsals in the industry.
Key features
- 100 discs per box
- Top notch abrasive for precision sanding
- Ideal for a variety of applications
Product details
- Brand
- Finixa
- Number
- SPDD 0080
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Applicable for
- paint removal surface preparation
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene chlorides thermosetting composites carbon fiber thermoplastics coated metals composite SMC metal plastic leather fabric emblems plastic panels nameplates
- Attachment type
- hook and loop
- Carrier
- paper
- Coating
- open
- Diameter
- 125 cm
- Grit size
- 80
- Grit type
- aluminium oxide
- Length
- 125 cm
- Number of holes
- 8
- Perforated
- yes
- Thickness
- 10 mm
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric rotating
- Width
- 1250 mm
Application
-
SPDA-SPDD-SPDE-SPDS application
Directions for use
Intended to be used on a excentric rotating sander.
The discs can only be used for dry sanding. For use on paints, wood, polyester fillers, and primers.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.
DETAIL29031
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL29031
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1