SPDA 0500 - Abrasive red-paper-Ø150mm 15 holes P500 100p.
SPDA 0500
High-performance solution for automotive refinishing. Engineered with advanced technology, including double-glued layers and blue fired aluminum oxide grit enriched with diamond powder, it ensures fast, sharp, and long-lasting sanding. Versatile for old and new paints, high-solid primers, clear coats, and polyester putties, this disc delivers efficient results, making it an essential tool for professionals in the industry.
Key features
- Paper carrier disc.
- Self-sharpening grits, blue fired treated aluminium oxide.
- Faster sanding due to self-sharpening technology.
- Longer lifespan due to self-sharpening technology.
- Stearate coated, to prevent clogging.
- Can be used on polyester putties, high solid primers, clear coats, as well as old and new paints.
Product details
- Brand
- Finixa
- Number
- SPDA 0500
- Colour
- red
- Material
- paper
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 8
- Units for pallet
- 336
- Applicable for
- matting surface preparation
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene chlorides thermosetting composites carbon fiber thermoplastics coated metals
- Attachment type
- hook and loop
- Carrier
- paper
- Coating
- open
- Diameter
- 150 mm
- Grit size
- 500
- Grit type
- aluminium oxide
- Length
- 150 mm
- Number of holes
- 15
- Perforated
- yes
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric rotating
- Width
- 150 mm
Application
-
SPDA-SPDD-SPDE-SPDS application
Directions for use
Intended to be used on a excentric rotating sander.
The discs can only be used for dry sanding. For use on paints, wood, polyester fillers, and primers.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.
DETAIL29024
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL29024
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/7WQtu7IKXXs?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1