SFDF 1500 - Finishing film discs Ø75mm-no holes P1500 50p.
SFDF 1500
A premium film abrasive designed for matting and paint correction. Featuring aluminum oxide grain and a polyester film backing, it delivers a very fine scratch pattern for efficient polishing. 50 discs per box.
Key features
-
- • Premium film abrasive disc for matting and paint correction
-
- • Aluminium oxide grain, Polyester film backing
-
- • Very fine scratch pattern for fast and easy polishing
-
- • Ultra-flat and smooth film backing
-
- • Specially developed stearate layer for les clogging and longer lifespan
-
- • Intended for dry sanding only
-
- • For best results use on a 3 mm deviation DA sander with a 5mm interface pad
Product details
- Brand
- Finixa
- Number
- SFDF 1500
- Colour
- white
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 10
- Applicable for
- orange peel removal dust nib removal paint runner removal removing micro scratches removing deep scratches matting blending
- Application surfaces
- steel; E-coating; galvanized steel; aluminum; Aluminium Rims; fiberglass; hard plastic; soft plastic; chrome; rubber; new paint; good paint; neglected paint; matt paint; gelcoat; putty; primer/filler; OEM paint; refinish paint; wood; zinc; enamel; ceramic; copper; lead; stainless steel; high-pressure laminate; stone; concrete; gypsum board; cement fiber panels; polyethylene; polypropylene; polycarbonate; polymethyl methacrylate; polytetrafluoroethylene; chlorides; thermosetting composites; carbon fiber; thermoplastics; coated metals
- Attachment type
- hook and loop
- Carrier
- film
- Coating
- semi-open
- Diameter
- 75 mm
- Grit size
- 1500
- Grit type
- Aluminium oxide
- Length
- 75 mm
- Perforated
- no
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric
- Width
- 75 mm
Application
-
SFDE – SFDF application
Directions for use
Intended to be used on a excentric rotating sander. For best results use on a 3mm deviation sander with a 5mm interface pad. The discs can only be used for dry sanding. Product especially suited for preparation before blending in grits P800 & P1000, and for paint defect rectification in grit P1500, P2000, and P2500.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.
Downloads
| Name | Asset Type | Language | File type | Download |
|---|