SFDE 0800 - Finishing film discs Ø150mm-15 holes P800 50p.
SFDE 0800
Key features
-
- • Premium film abrasive for matting and paint correction
-
- • Aluminium oxide grain, Polyester film backing
-
- • Very fine scratch pattern for fast and easy polishing
-
- • Ultra-flat and smooth film backing
-
- • Specially developed stearate layer for les clogging and longer lifespan
-
- • Intended for dry sanding only
-
- • For best results use on a 3 mm deviation DA sander with a 5mm interface pad (SAM 37)
Product details
- Brand
- Finixa
- Number
- SFDE 0800
- Colour
- white
- Material
- film
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 10
- Applicable for
- orange peel removal dust nib removal paint runner removal removing micro scratches removing deep scratches matting blending
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene chlorides thermosetting composites carbon fiber thermoplastics coated metals
- Attachment type
- hook and loop
- Carrier
- film
- Coating
- semi-open
- Diameter
- 150 mm
- Grit size
- 800
- Grit type
- aluminium oxide
- Length
- 150 mm
- Number of holes
- 15
- Perforated
- yes
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric
- Width
- 150 mm
Application
-
SFDE – SFDF application
Directions for use
Intended to be used on a excentric rotating sander. For best results use on a 3mm deviation sander with a 5mm interface pad. The discs can only be used for dry sanding. Product especially suited for preparation before blending in grits P800 & P1000, and for paint defect rectification in grit P1500, P2000, and P2500.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.
DETAIL28799
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28799
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
Downloads
| Name | Asset Type | Language | File type | Download |
|---|