SFDE 0800 - Finishing film discs Ø150mm-15 holes P800 50p.
SFDE 0800
Finixa SFDE Finishing Film Discs are premium finishing abrasives developed for paint correction, denibbing, matting and blend preparation in automotive refinish and industrial finishing applications. Featuring high-quality aluminium oxide grain on a polyester film backing, these discs produce an extremely fine and uniform scratch pattern, enabling faster polishing and consistent surface quality. The ultra-flat film construction improves contact with the surface, resulting in a more controlled sanding process.
Premium Film Abrasive for Paint Correction and Fine Finishing
The SFDE series combines a polyester film backing with a specially developed stearate coating that helps minimize clogging and significantly extends disc life. Designed for dry sanding applications, these discs are particularly suitable for removing dust nibs, orange peel, paint runs and fine surface imperfections prior to polishing or blending operations. Available in grit sizes P800, P1000, P1500, P2000 and P2500. 50 discs per box.
Key features
- Premium film abrasive for matting and paint correction
- Aluminium oxide grain, Polyester film backing
- Very fine scratch pattern for fast and easy polishing
- Ultra-flat and smooth film backing
- Specially developed stearate layer for les clogging and longer lifespan
- Intended for dry sanding only
- For best results use on a 3 mm deviation DA sander with a 5mm interface pad (SAM 37)
Product details
- Brand
- Finixa
- Number
- SFDE 0800
- EAN
- 5491196015629
- Colour
- white
- Length
- 150 mm
- Width
- 150 mm
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 10
- Applicable for
- blending; dust nib removal; matting; orange peel removal; paint runner removal; removing deep scratches; removing micro scratches
- Application surfaces
- steel; E-coating; galvanized steel; aluminum; Aluminium Rims; fiberglass; hard plastic; soft plastic; chrome; rubber; new paint; good paint; neglected paint; matt paint; gelcoat; putty; primer/filler; OEM paint; refinish paint; wood; zinc; enamel; ceramic; copper; lead; stainless steel; high-pressure laminate; stone; concrete; gypsum board; cement fiber panels; polyethylene; polypropylene; polycarbonate; polymethyl methacrylate; polytetrafluoroethylene; chlorides; thermosetting composites; carbon fiber; thermoplastics; coated metals
- Attachment type
- hook and loop
- Carrier
- film
- Coating
- semi-open
- Diameter
- 150 mm
- Grit size
- 800
- Grit type
- Aluminium oxide
- Number of holes
- 15
- Perforated
- yes
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric
Application
-
SFDE – SFDF application
Directions for use
Intended to be used on a excentric rotating sander. For best results use on a 3mm deviation sander with a 5mm interface pad. The discs can only be used for dry sanding. Product especially suited for preparation before blending in grits P800 & P1000, and for paint defect rectification in grit P1500, P2000, and P2500.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.
DETAIL28799
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28799
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/GQASlnevAX8?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
Frequent Asked Questions
P1500, P2000 and P2500 are specifically recommended for paint defect rectification such as dust nibs, paint runs and orange peel.
No. The SFDE series is designed exclusively for dry sanding applications.
Finixa recommends a DA sander with a 3 mm orbit combined with a 5 mm interface pad for optimal finishing performance.
Downloads
Language
| Name | Asset Type | Language | File type | Download |
|---|---|---|---|---|
| SFDE0800-2500_Finixa_TDS_IT.pdf | TDS | Italiano | 794 KB | |
| SFDE0800-2500_Finixa_TDS_PT.pdf | TDS | Portuguese | 821 KB | |
| SFDE0800-2500_Finixa_TDS_PL.pdf | TDS | Polski | 802 KB | |
| SFDE0800-2500_Finixa_TDS_DE.pdf | TDS | Deutsch | 909 KB | |
| SFDE0800-2500_Finixa_TDS_EN.pdf | TDS | English | 823 KB | |
| SFDE0800-2500_Finixa_TDS_FR.pdf | TDS | Français | 914 KB | |
| SFDE0800-2500_Finixa_TDS_ES.pdf | TDS | Español | 912 KB | |
| SFDE0800-2500_Finixa_TDS_NL.pdf | TDS | Nederlands | 856 KB |