SFDD 0600 - SharpWhite sanding disc Ø75mm - Multihole P600 50p.
SFDD 0600
Sharpwhite features a highly grits specific balanced mixture of ceramic and aluminum oxide grit with high initial cutting power for fast, efficient sanding with a grit specific finish! Developed for spot and smart repairs, it's perfect for tackling hard-to-reach areas, making it essential for bumper and wheel repairs. 50 discs per box.
Key features
-
- • Fast, accurate, dust-free sanding
-
- • Developed for spot and smart repair
-
- • Perfect for sanding hard to reach areas
-
- • A must-have for bumper and wheel repair
-
- • Quick & easy disc change
-
- • For 75mm dual action sanders
-
- • High initial cutting power; the self-sharpening grains are broken out of the granulate by the sanding forces, creating new and sharp grain tips
-
- • Longer disc life; white, anti-clogging coating that helps keep the disc from loading up during sanding
-
- • Excellent dust extraction ; 29 holes
-
- • Adapted to the latest paint systems; works perfectly on air-drying primers, scratch-resistant clearcoats and UV cured paints
Product details
- Brand
- Finixa
- Number
- SFDD 0600
- Colour
- white
- Length
- 75 mm
- Width
- 75 mm
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 48
- Applicable for
- matting; surface preparation; blending
- Application surfaces
- steel; E-coating; galvanized steel; aluminum; Aluminium Rims; fiberglass; hard plastic; soft plastic; chrome; rubber; new paint; good paint; neglected paint; matt paint; gelcoat; putty; primer/filler; OEM paint; refinish paint; wood; zinc; enamel; ceramic; copper; lead; stainless steel; high-pressure laminate; stone; concrete; gypsum board; cement fiber panels; polyethylene; polypropylene; polycarbonate; polymethyl methacrylate; polytetrafluoroethylene; chlorides; thermosetting composites; carbon fiber; thermoplastics; coated metals
- Attachment type
- hook and loop
- Carrier
- film
- Coating
- open
- Diameter
- 75 mm
- Grit size
- 600
- Grit type
- Ceramic
- Number of holes
- 29
- Perforated
- yes
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric; rotating
Application
-
SFDC – SFDD application
Directions for use
Intended to be used on a excentric rotating sander.
The discs can be used for wet and dry sanding. For use on paints, wood, polyester fillers, and primers.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.