SFDD 0500 - SharpWhite sanding disc Ø75mm - Multihole P500 50p.
SFDD 0500
Key features
-
- • Fast, accurate, dust-free sanding
-
- • Developed for spot and smart repair
-
- • Perfect for sanding hard to reach areas
-
- • A must-have for bumper and wheel repair
-
- • Quick & easy disc change
-
- • For 75mm dual action sanders
-
- • High initial cutting power; the self-sharpening grains are broken out of the granulate by the sanding forces, creating new and sharp grain tips
-
- • Longer disc life; white, anti-clogging coating that helps keep the disc from loading up during sanding
-
- • Excellent dust extraction ; 29 holes
-
- • Adapted to the latest paint systems; works perfectly on air-drying primers, scratch-resistant clearcoats and UV cured paints
Product details
- Brand
- Finixa
- Number
- SFDD 0500
- Colour
- white
- Material
- film
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 48
- Applicable for
- matting surface preparation
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene chlorides thermosetting composites carbon fiber thermoplastics coated metals
- Attachment type
- hook and loop
- Carrier
- film
- Coating
- open
- Diameter
- 75 mm
- Grit size
- 500
- Grit type
- ceramic aluminium oxide
- Length
- 75 mm
- Number of holes
- 29
- Perforated
- yes
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric rotating
- Width
- 75 mm
Application
-
SFDC – SFDD application
Directions for use
Intended to be used on a excentric rotating sander.
The discs can be used for wet and dry sanding. For use on paints, wood, polyester fillers, and primers.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.