SFDC 0400 - SharpWhite sanding disc Ø150mm - Multihole P400 100p.
SFDC 0400
Key features
-
- • SharpWhite premium abrasive ensures efficient sanding with anti-clogging coating.
-
- • SharpWhite sands 20% faster, reduces labor costs, increases revenue, and maximizes equipment use.
-
- • High initial cutting power; the self-sharpening grains are broken out of the granulate by the sanding forces, creating new and sharp grain tips
-
- • Longer disc life; white, anti-clogging coating that helps keep the disc from loading up during sanding
-
- • Excellent dust extraction due to the multi-hole pattern
Product details
- Brand
- Finixa
- Number
- SFDC 0400
- Colour
- white
- Material
- film
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 8
- Units for pallet
- 336
- Applicable for
- matting surface preparation
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene chlorides thermosetting composites carbon fiber thermoplastics coated metals
- Attachment type
- hook and loop
- Carrier
- film
- Coating
- open
- Diameter
- 150 mm
- Grit size
- 400
- Grit type
- ceramic aluminium oxide
- Length
- 150 mm
- Number of holes
- 75
- Perforated
- yes
- Thickness
- 1 mm
- Type
- box
- Use
- dry
- Use by hand
- no
- Use with machine type
- eccentric rotating
- Width
- 150 mm
Application
-
SFDC – SFDD application
Directions for use
Intended to be used on a excentric rotating sander.
The discs can be used for wet and dry sanding. For use on paints, wood, polyester fillers, and primers.
- Start the sander ON the surface and stop OFF the surface. This will significantly reduce swirl marks.
- Apply light hand pressure on the sander and allow the backing pad to move freely. Let the tool do the work.
- Run the sander flat on the surface to prevent gouging.
- Follow a set pattern when sanding. This ensures that previous scratches are removed and a uniform finish is reached. Always follow the sanding steps prescribed by your paint supplier.
DETAIL28800
https://www.youtube.com/embed/rlfHh2qJH9s?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/rlfHh2qJH9s?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28800
https://www.youtube.com/embed/rlfHh2qJH9s?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/rlfHh2qJH9s?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1