Undercoating M80 black - Repaintable
4010
Undercoating with anti-corrosion and noise reduction properties. Material made of rubber and resins. After drying, the coating is paintable. The coating offers excellent protection against climatic influences and against gravel and stone chips. 1 L tin with spray connection (suitable for +/- 2.5 m2). 2 versions: black and grey.
Key features
- The coating offers excellent protection against climatic influences and against gravel and stone chips
- Very good adhesion to a wide range of substrates
- Very good resistance of weather influences spray water and abrasion
Product details
- Brand
- Colad
- Number
- 4010
- EAN
- 8714247001448
Frequent Asked Questions
Shake before use.
The surfaces to be treated must be clean, dry, rust-, dust- and grease free.
Can be applied by an Undercoating Spray Gun with an air-pressure of 3-6 bar.
Recoated without bleeding.
Over-painted (depending on the layer thickness, temperature and humidity), after about 60 to 90 minutes, with most of the commonly used conventional 2K- and base coat lacquers. When a 2Klacquer is used, we advise to first use a layer of primer and to paint over after this layer has completely dried.
Optimum spraying distance: 30cm
Cleaning contaminated surfaces and equipment: in ‘fresh’ condition with solvents.
Over-painted (depending on the layer thickness, temperature and humidity), after about 60 to 90 minutes, with most of the commonly used conventional 2K- and base coat lacquers. When a 2Klacquer is used, we advise to first use a layer of primer and to paint over after this layer has completely dried.
Salt spray test (DIN 50021)
Up to 480 hours, Ri 0 at 350 μ dry layer thickness
Up to 720 hours, Ri 0 at 350 μ dry + paint
Gravel test (SAE-J400 method) 6A – 6B at 350 μ dry layer thickness
Bending test (DIN 53152, +70°C) No cracks, no loss of adhesion
Bending test (DIN 53152, -30°C) Minor cracks, no loss of adhesion