SSS - Sprayable seam sealer 290ml

SSS 100-400

High-quality MS Polymer formulation for firm-setting applications in auto body seams and joints. This versatile sealer requires no primer, offers excellent adhesion, and allows for paintability after just 30 minutes. The standard 290 ml cartridge fits all caulking guns, and it's available in white, grey, black, and beige colours. Per piece.

Key features

• MS Polymer

• Firm-setting sealer for interior and exterior auto body seams and joints.

• Replaces and repairs factory sealing jobs in trunk, floor and drip rail areas.

• No primer needed, good adhesion, lasting flexibility.

• Atomised, by using a combi sealant gun (CSG 00), the seam sealer can be used inside door skins, inside body panels, or any area where a sound deadening and/or structured coating is needed.

• Standard 290ml cartridge, fits in all standard caulking guns.

• Available in white, grey, black and beige colour.

• Paintable after 30 minutes with any primer, water- or solvent-based basecoat or topcoat.

Dust Extraction Advice

Product details

Brand: Finixa
Number: SSS 100-400
Colour: white
Weight (kg): 1
Dry storage: yes
Minimum storing temperature: -40 °C
Maximum storing temperature: 90 °C
Storing condition: dark
Freezing resistant: yes

Application

SSS 100-200-300-400 application - Directions for Use

Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
Cartridge Loading: Insert the cartridge into a compatible spray gun.
Test Spray: Perform a test spray on a scrap surface to ensure proper flow and pattern.
Application: Spray the seam sealer evenly along the seam, joint, or surface to be sealed or use a (pneumatic) applicator gun to spray the sealer onto the surface.
Cure Time: Allow 24 hours for a layer thickness of 2-3mm to fully cure.

HIGH QUALITY

Our products are tested extensively before they are brought onto the market.

ECOLOGICAL

We work on finding solutions to replace traditional solvent-based products by high-performing water-based alternatives.

INNOVATION

Our research and development department focuses on product innovation and improvement in order to not only meet the demands of the market, but to simplify the car repair process.