MSA 100 - MS Fast adhesive - 290ml - white
MSA 100
Our cutting-edge MS Fast Adhesive designed for professional construction and assembly projects. This hybrid adhesive boasts exceptional initial tack, transforming into a durable elastic rubber upon curing. Ideal for bare plates, it eliminates the risk of corrosion and ensures a shrink-free, bubble-free finish. With sound and vibration absorption properties, MSA 100 stands out in versatility—compatible with overspraying using common 1K or 2K paint systems. Free from isocyanates, phthalates, solvents, or silicones, it offers a permanent, elastic bond on various surfaces, even damp ones. Experience UV resistance, neutral curing, and high mechanical strength with MSA 100, the adhesive that goes beyond expectations.
Key features
-
- • MSA 100 is a construction and assembly adhesive with very high initial tack for the professional market, based on hybrid technology that forms as a durable elastic rubber after curing.
-
- • Can be applied on bare plate without risk of corrosion. Shrink and air bubble free. Absorbs sound and mechanical vibrations. Can be oversprayed with all common 1K or 2K paint systems on the market.
-
- • Does not contain any isocyanates, phthalates, solvents or silicones.
-
- • Durable, permanent elastic
-
- • Universal bonding and sealing
-
- • Adheres perfectly without primer on most even damp surfaces
-
- • Free of isocyanates, solvents and silicones
-
- • No shrinkage and bubble free
-
- • Good UV resistance
Product details
- Brand
- Finixa
- Number
- MSA 100
- Colour
- white
- Width (cm)
- 2.5
- Shelf life
- 18 months
- Dry storage
- yes
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 12
- Units for pallet
- 1248
Application
-
MSA 100 application - Directions for Use:
- Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
- Cartridge Loading: Load the cartridge into a compatible applicator gun.
- Application: Apply the adhesive to one or both surfaces as required, do not put in dots, use a cam for longer areas.
- Joining: Press the parts together firmly.
- Cure Time: Allow 24 hours for a layer thickness of 2-3mm to fully cure.
- Cleanup: Remove excess adhesive with a suitable cleaner before it cures.