ESS 08 - Easy seam sealer on a roll - 8mm x 9m
ESS 08
The OEM profile sealer for doors, bonnets, and boot lids. Quick, heat-resistant, and paint-ready. 9 m. per roll.
Key features
-
- • OEM profile
-
- • For plugging seams on doors, bonnets and boot lids
-
- • Can be applied quickly and easily
-
- • Heat resistant and can be overpainted immediately
-
- • ESS 06: for Japanese, Korean and French cars
-
- • ESS 08: most of the German cars (Mercedes, Volkswagen, Audi)
-
- • ESS 10: BMW, vans and large SUVs
Product details
- Brand
- Finixa
- Number
- ESS 08
- Colour
- off white
- Width
- 0.8
- Material
- thermoplastic elastomers
- Dry storage
- yes
- Minimum storing temperature
- 5 °C
- Storing condition
- dark
- Freezing resistant
- yes
- Units for outer box
- 25
- Units for pallet
- 600
Application
-
ESS application - Directions for Use:
- Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
- Measure: Cut the desired length of sealer from the roll.
- Apply: Apply a fine coat of adhesion promotor(TSP 030) to the surface and leave for 5 minutes. Peel the backing and apply the seam sealer directly onto the surface.
- Press: Use a roller or your fingers to press down firmly, ensuring good adhesion and a watertight seal.
- Curing: Can be overpainted immediately but fully cured after 24 hours.