DZB 12 - Double sided tape red 12mm x 10m
DZB 12
Key features
-
- • Acrylic adhesive base tape for attaching protective side moldings on vehicles.
-
- • Strong initial contact; offers superior adhesion at any given temperature.
-
- • In order to get a 100% adhesion, make sure the surface is properly degreased before application.
-
- • The advantage of this unique acrylic tape is that the initial strength after 2 minutes is 80% of the total, whereas traditional double sided foam tape requires 12 to 24 hours to reach the same strength.
Product details
- Number
- DZB 12
- Colour
- Black
- Freezing resistant
- yes
- Material
- acrylic foam
- Applicable for
- bonding sealing
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RIMS fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate polytetrafluoroethylene chlorides thermosetting composites carbon fiber thermoplastics coated metals
- Corrosive to metals
- no
- Continuous heat resistance
- 35 °C
- Minimum processing temperature
- -10 °C
- Tensile Strength (Ncm)
- 175 N/cm²
- Thickness
- 1.1 mm
- Storing condition
- dark
- Width
- 1.2
- Units for outer box
- 10
Application
-
DZB application - Directions for Use:
- Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
- Cut to Length: Firmly apply one side to the surface and cut to the desired length.
- Apply to One Surface: Peel of the backing and firmly press the 2nd surface onto the first – Hold for +-2 minutes to reach 80% of the final strength.
- Curing Time: Allow up to 24 hours for maximum adhesion strength.