UV Putty Transparent
915033
Ready-to-use UV Putty Transparent, for easy repair of rock chips.
The Colad Fast Curing System UV Putty Transparent is a UV putty specially developed to fill tiny rock chips. Just fill, sand and polish to achieve an even surface and avoid spraying too large an area. Perfect for smart and spot repairs. The putty is a single-component product and is easy to apply to various substrates, like metal and plastics. Apply the putty with the Colad Paint Touch-Up Sticks included to fill even the smallest chips. Easy to dry with the Colad Fast Curing System UV Curing Light, with a maximum curing time of 5 seconds. Ready for further processing immediately after curing.
Key features
- Ready to use; no need to add a hardener
- Includes applicators (Colad Paint Touch-Up Sticks)
- No shrinkage
- Fill even the smallest chips with the Colad Paint Touch-Up Sticks
- Specially designed to repair the smallest rock chips
- Reduces the area to be sprayed
- 1-component putty
- Solvent-free
- Styrene-free
- Delivered in a black, UV-resistant plastic bottle
Product details
- Brand
- Colad
- Number
- 915033
- EAN
- 8714247067444
DETAIL40286
https://www.youtube.com/embed/7H-AMZSLNa4?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/7H-AMZSLNa4?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL40286
https://www.youtube.com/embed/7H-AMZSLNa4?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/7H-AMZSLNa4?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
Frequent Asked Questions
No, this is a 1-component product, eliminating the need for a hardener.
No, the preparation does not differ from that of a normal putty. Clean, sand if necessary and degrease the surface before application.
Even though normal sunlight does contain UV radiation, curing your UV putty in this way is not recommended. The sun produces irregular radiation, which could result in the putty curing unevenly and cause adhesion problems.