GAP 70 - Plastfill-Polyester putty for plastic- 1 kg + hardener
GAP 70
Plastfill is a specialized light putty designed for plastic surfaces, offering high flexibility, smooth finishing, and quick and easy sanding. It is also suitable for use on fiberglass. The putty features a built-in sanding guide; as you sand, it transitions from dark grey to light grey, aiding in the sanding process. This ensures a seamless and effective application on plastic surfaces.
Key features
-
- • Light putty specially designed for plastic surfaces
-
- • Very high flexibility
-
- • Smooth finishing
-
- • Fast & easy sanding
-
- • Can also be used on fiberglass
-
- • Built-in sanding guide: during sanding the putty fades from dark grey to light grey
-
- • Specific weight : 1,3Kg/L
Product details
- Number
- GAP 70
- Colour
- dark grey
- Freezing resistant
- no
- Material
- polyester
- Minimum Order Quantity
- 12
- Amount of hardener
- 2 %
- Maximum air humidity
- 80 %
- Maximum temperature resistance - uncured
- 3 °C
- Minimum processing temperature
- 10 °C
- Recommended curing temperature - IR
- 45 °C
- Specific weight (g/L)
- 1 g/L
- Stack support
- no
- Time until sandable
- 20 minutes
- Time until sanding - IR
- 10 minutes
- Volume
- 0.75 L
- Workable surface state
- dry
- Product weight
- 1184 g
- Shelf life
- 18 months
- Storing condition
- dark
- Units for pallet
- 420
- Sales unit
- 1
- Units for outer box
- 12
Application
-
Application GAP xx - Directions for use:
- Degrease surface before applying putty. Use 2 cloths in the process.
- Weigh needed amount of putty for the job.
- Add 2% of BPO hardener.
- Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
- Apply putty to desired surface.
- Allow to cure, time will be influenced by humidity and temperature.
- Sand, and re-apply if necessary.
- 4 minutes