GAP 33 - Polyester putty 3kg + hardener - extra light
GAP 33
.png)
.png&width=180&format=webp)
.png&width=640&format=webp)
A versatile finishing putty known for its excellent adhesion on metal surfaces, low shrinkage ratio, and quick drying. It contains PVC microbeads as filling material, ensuring a fine finish similar to "FINE" putty. This putty combines superb sanding properties with a compact surface, making it easy to sand. It adheres well to various substrates, including steel, E-coat, galvanized steel, glass fiber-reinforced plastics (GFK), and wood, and it dries quickly, saving you time on your projects. Ideal for achieving smooth finishes on different surfaces.
Key features
-
- • Universal extra light finishing putty
-
- • Good adhesion on metal surfaces
-
- • Low shrinkage ratio
-
- • With pvc microbeads as filling material
-
- • Same applications as “MULTI” putty but results in the same fine finish as “FINE” putty
Product details
- Brand
- Finixa
- Number
- GAP 33
- Colour
- green
- Height
- 20.2 cm
- Material
- polyester
- Shelf life
- 18 months
- Dry storage
- yes
- Minimum storing temperature
- 5 °C
- Storing condition
- dark
- Freezing resistant
- no
- Units for outer box
- 4
- Units for pallet
- 120
- Diameter
- 15.9 cm
- Filling substance
- plastic
- Maximum air humidity
- 80 %
- Maximum temperature resistance - cured
- 80 °C
- Maximum temperature resistance - uncured
- 3 °C
- Minimum processing temperature
- 10 °C
- Pot life
- 5 minutes
- Recommended curing temperature - IR
- 45 °C
- Specific weight (g/L)
- 3 g/L
- Stackable
- no
- Time until sandable
- 20 minutes
- Time until sanding - IR
- 10 minutes
- UV
- No
- Volume
- 3 L
- Workable surface state
- dry
Application
-
Application GAP xx - Directions for use:
- Degrease surface before applying putty. Use 2 cloths in the process.
- Weigh needed amount of putty for the job.
- Add 2% of BPO hardener.
- Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
- Apply putty to desired surface.
- Allow to cure, time will be influenced by humidity and temperature.
- Sand, and re-apply if necessary.