GAP 25 - Self-levelling putty – 1kg+ hardener

GAP 25

Experience perfection with our Self-levelling putty. Achieve an ultra-smooth finish effortlessly, free from pinholes. Ideal for final scratch removal or fixing imperfections. It's easy to sand and a great alternative to GAP 20.

Key features

• Ultra smooth finishing putty

• Pinhole free self levelling ability

• To finish off any other polyester for final scratch removal or pinholes

• Easy to sand

• Alternative for GAP 20

Dust Extraction Advice

Product details

Brand: Finixa
Number: GAP 25
Colour: lime green
Material: polyester
Shelf life: 12 months
Dry storage: yes
Minimum storing temperature: 5 °C
Storing condition: dark
Freezing resistant: no
Units for outer box: 6
Units for pallet: 312
Amount of hardener: 2 %
Height: 8.5 cm
Maximum air humidity: 80 %
Maximum temperature resistance - cured: 80 °C
Maximum temperature resistance - uncured: 2 °C
Minimum processing temperature: 10 °C
Pot life: 3 minutes
Recommended curing temperature - IR: 45 °C
Specific weight (g/L): 1 g/L
Stackable: no
Time until sandable: 20 minutes
Time until sanding - IR: 10 minutes
Type: bag
VOC: 16 g/L
Volume: 0.85 L
Workable surface state: dry

Application

Application GAP xx - Directions for use:

Degrease surface before applying putty. Use 2 cloths in the process.
Weigh needed amount of putty for the job.
Add 2% of BPO hardener.
Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
Apply putty to desired surface.
Allow to cure, time will be influenced by humidity and temperature.
Sand, and re-apply if necessary.

HIGH QUALITY

Our products are tested extensively before they are brought onto the market.

ECOLOGICAL

We work on finding solutions to replace traditional solvent-based products by high-performing water-based alternatives.

INNOVATION

Our research and development department focuses on product innovation and improvement in order to not only meet the demands of the market, but to simplify the car repair process.