GAP 20 - Polyester putty 2kg + hardener - fine

GAP 20

Polyester putty FINE, the ideal choice for achieving a flawless finish. Specifically designed to follow 'MULTI' putty, it excels at eliminating minor imperfections. Its bright white colour, high filling power, and easy application and sanding make it the ideal 'finishing' putty. It's your solution for pinholes, small irregularities, and scratches, with no top coat sinking.

Key features

• Fine finishing putty. To be used after “MULTI” putty to remove small irregularities.

• To be applied in thin and very thin coats

• Bright white pigmentation

• High filling power

• A real ‘finishing’ putty

• Easy to apply and sand

• High elasticity

• To fill pin holes, small irregularities, small paint damages or scratches

• No sinking of the top coat

Dust Extraction Advice

Product details

Brand: Finixa
Number: GAP 20
Colour: white
Material: polyester
Shelf life: 18 months
Dry storage: yes
Minimum storing temperature: 5 °C
Storing condition: dark
Freezing resistant: no
Units for outer box: 6
Units for pallet: 288
Amount of hardener: 2 %
Diameter: 16.2 cm
Filling substance: chalk
Height: 8.5 cm
Maximum air humidity: 80 %
Maximum temperature resistance - cured: 80 °C
Maximum temperature resistance - uncured: 3 °C
Minimum processing temperature: 10 °C
Pot life: 4 minutes
Recommended curing temperature - IR: 45 °C
Specific weight (g/L): 1.68 g/L
Stackable: no
Time until sandable: 15 minutes
Time until sanding - IR: 10 minutes
VOC: 4 g/L
Volume: 1.19 L
Workable surface state: dry

Application

Application GAP xx - Directions for use:

Degrease surface before applying putty. Use 2 cloths in the process.
Weigh needed amount of putty for the job.
Add 2% of BPO hardener.
Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
Apply putty to desired surface.
Allow to cure, time will be influenced by humidity and temperature.
Sand, and re-apply if necessary.

HIGH QUALITY

Our products are tested extensively before they are brought onto the market.

ECOLOGICAL

We work on finding solutions to replace traditional solvent-based products by high-performing water-based alternatives.

INNOVATION

Our research and development department focuses on product innovation and improvement in order to not only meet the demands of the market, but to simplify the car repair process.