GAP 10 - Polyester putty 2kg + hardener - multi

GAP 10

Our versatile 2K polyester putty is perfect for a range of applications. Its exceptional stability on vertical surfaces and high filling power make it a top choice. The fine grain composition ensures no cracking during fine sanding. You can finish it with FINE putty or apply primer or filler directly. Please note it's less suitable for light metals and galvanized bases.

Key features

• Universal 2K polyester putty

• Maximum stability on vertical surfaces

• High filling power

• Fine grain composition

• No cracking on the edges by fine sanding

• Can be finished afterwards with FINE putty or directly with primer or filler.

• Less suited for light metals and galvanized bases.

• Colour: off white

Dust Extraction Advice

Product details

Brand: Finixa
Number: GAP 10
Colour: light grey
Material: polyester
Shelf life: 18 months
Dry storage: yes
Minimum storing temperature: 5 °C
Storing condition: dark
Freezing resistant: no
Units for outer box: 6
Units for pallet: 288
Amount of hardener: 2 %
Application surfaces: steel
Diameter: 16.2 cm
Height: 8.5 cm
Maximum air humidity: 80 %
Maximum temperature resistance - cured: 80 °C
Maximum temperature resistance - uncured: 3 °C
Minimum processing temperature: 10 °C
Pot life: 4 minutes
Recommended curing temperature - IR: 45 °C
Specific weight (g/L): 1.81 g/L
Stackable: no
Time until sandable: 20 minutes
Time until sanding - IR: 10 minutes
VOC: 6 g/L
Volume: 1.1 L
Workable surface state: dry

Application

Application GAP xx - Directions for use:

Degrease surface before applying putty. Use 2 cloths in the process.
Weigh needed amount of putty for the job.
Add 2% of BPO hardener.
Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
Apply putty to desired surface.
Allow to cure, time will be influenced by humidity and temperature.
Sand, and re-apply if necessary.

HIGH QUALITY

Our products are tested extensively before they are brought onto the market.

ECOLOGICAL

We work on finding solutions to replace traditional solvent-based products by high-performing water-based alternatives.

INNOVATION

Our research and development department focuses on product innovation and improvement in order to not only meet the demands of the market, but to simplify the car repair process.