HRS 00 - Headlight renewal set

HRS 00

Introducing our Headlight Renewal Set, a hassle-free solution to restore headlights to their original state in a few simple steps! Avoid costly replacements by removing UV radiation, stone chips, and yellowing. Enhance light output, safety, and car value effortlessly. The all-in-one set includes waterproof abrasives (SPLA 0800 and 1000), an ammonia-free water-based cleaner and degreaser (TSP 600 FOAM-IT aerosol 400 ml), and a 2K clear coat with perfect adhesion on polycarbonate (TSP 710 aerosol 250 ml). Achieve professional results with ease using our Headlight Renewal Set.

Key features

• Brings headlights back to their original state in just a few easy steps!

• Avoid costly replacements

• Removes UV radiation, stone chips and yellowing

• Increases light output and car value

• Easy and cost effective: simply sand, degrease and spray

Dust Extraction Advice

Product details

Brand: Finixa
Number: HRS 00

Application

HRS 00 Application - Directions for Use:

Preparation:
- Clean the headlight surface to remove dirt and grease.
- Mask off surrounding areas to protect them from abrasion and overspray.

Sanding:
- Start with the P800 abrasive to sand away the yellowed and damaged layer.

Cleaning:
- Apply the water-based cleaner to remove any sanding residue.
- Wipe clean with a soft, lint-free cloth.

Sanding:
- Use P1000 abrasive to smooth out the surface.

Cleaning:
- Apply the water-based cleaner to remove any sanding residue.

2K Clear Coat Application:
- Shake the 2K clear coat can for about 2 minutes.
- Activate the 2K clear coat can.
- Apply a thin, even layer of the 2K clear coat over the sanded and cleaned surface.
- Give 5-10 minutes flash-off time before applying a 2nd layer.
- Apply a full, even layer of the 2K clear coat over the sanded and cleaned surface.

Drying Time:
- Allow at least 60 minutes for the clear coat to be touch dry.
- For optimal results, allow 24 hours for full curing.

Clean Up:
- Remove masking tape and clean up any spills or drips with a suitable solvent.

HIGH QUALITY

Our products are tested extensively before they are brought onto the market.

ECOLOGICAL

We work on finding solutions to replace traditional solvent-based products by high-performing water-based alternatives.

INNOVATION

Our research and development department focuses on product innovation and improvement in order to not only meet the demands of the market, but to simplify the car repair process.