CCL 10 - Cleaning clay lubricant - 1l
CCL 10
Specially crafted for a smooth claying process, this lubricant makes it easy to remove adhered contaminants from your vehicle's surface. Say goodbye to scratches and hello to a smooth finish. After claying, your surface is ready for polishing or waxing. It's the perfect companion for your clay block, effortlessly removing tree resin and bird droppings. Safe and water-based, this 1-liter product ensures a scratch-free shine.
Key features
-
- • Specially formulated lubricant for easy and scratch-free claying, preparing surface for polishing or waxing.
-
- • Lubricant for the clay process
-
- • Clay block glides easily over the surface
-
- • Does not cause scratches
-
- • Removes tree resin
-
- • Removes bird droppings
-
- • Safe to use
-
- • 1L
Product details
- Brand
- Finixa
- Number
- CCL 10
- Colour
- green
- Shelf life
- 24 months
- Minimum storing temperature
- 5 °C
- Storing condition
- away from direct sunlight
- Freezing resistant
- no
- Units for outer box
- 200
- Units for pallet
- 200
Application
-
CCB 00 & CCL 10 application
- Wash the surface thoroughly with car shampoo (CSH 05) to remove surface dirt and grit.
- Take out one or both pieces of cleaning clay (CCB 00) and knead until it becomes flexible.
- Check CCB 00 for any heavy dirt particles that could scratch. If contaminated too much replace with a new bar.
- Flatten the piece of CCB 00 to start the process.
- Wet the surface with cleaning clay lubricant (CCL 10). Using the flattened piece of CCB 00, move in an overlapping pattern similar to sanding.
- Inspect the surface periodically to determine if contaminants are being removed. Wipe with a clean microfibre cloth (POL 40) and repeat the process if necessary.
- Place CCB 00 in the airtight container after work is done.
- Surface is now ready to wax, seal or polish by hand or machine, depending upon the original condition of the paint.