Snap Lid System® UV Resistant
9370xxxSLSUV
Complete UV paint application system containing 25 black, non-transparent Snap Lids with built-in strainer. 25 Colad black, non-transparent Mixing Cups 700 ml and 25 sealing caps
Available with 2 different micron built-in strainers (190 and 280 micron)
The fastest and easiest UV paint application system in the market
Our paint application system makes your UV painting process fast and efficient, just Mix, Snap & Go! The Snap Lid allows you to use your mixing cup as paint cup, speeding up your process in an easy way while using less materials. The built-in strainer offers a straining solution straight in the paint cup, available in 190 and 280 micron
Key features
- UV blocking; Snap Lid is specially designed for the processing of UV curing coatings
- Two filters available; 190 and 280 micron for conventional based coating and primer
- Fastest system; save time and money by using the mixing cup as a paint cup
- Ideal for average size paint jobs; the 700 ml mixing cup/paint cup has ideal capacity for average size paint jobs
- Unique valve system; prevents a vacuum and guarantees a stable paint flow
- Reinforced lid; for fast and easy closure and leak prevention
- Secure and tight thread; for a stable and watertight connection to the spray gun
- Connect any spray gun; matching adapter for almost all types of spray guns
Product details
- Brand
- Colad
- Number
- 9370xxxSLSUV
Frequent Asked Questions
You can buy Colad Snap Lid System with your preferred Colad dealer. If you don’t have a dealer selling the product, we can help you find a dealer who can can offer you our paint application system. If you need any help to find a dealer, please contact us through the contact form.
We have created an adapter selector that helps you find the right adapter based on your spray gun brand and type. Can’t find the right adapter for your spray gun? Contact us and we’ll help you find the adapter you need.
Colad Snap Lid system is designed as a paint application system suitable for all types of paint. We’d advice to check with your paint supplier which micron to use for a specific type of paint. In general the 90 micron filter (white) can be used for clear coat, the 130 micron filter (blue) for waterbased base and/or clear coat, the 190 micron filter (green) for conventional base coat and the 280 micron filter (red) for primer. However this might vary depending several conditions such as the recommendation from the paint manufacturer.
To get the best output from Colad Snap Lid System you should prevent too much air remaining between your spray gun and the built-in filter. This can be done by slowly tilting the gun after attaching the paint cup, in order to let the air out and the paint in, or by tilting the gun back and forward and release a bit of output. Once the transparent part of the lid between the filter and the spray gun is over 2/3 filled with paint, you will achieve the best paint flow.
For a visualization of the recommended way to place the lid on the cup you can watch our ‘Colad Snap Lid System user manual’ video. We recommend to attach the lid from one side, and slowly use both hands around both sides of the lid towards the other side. The lids are made to fit the cup perfectly, therefore you don’t have to apply excessive force to attach the lid properly.
Colad Snap Lid System can be refilled by gently lifting one side of the lid, adding more paint and reattach the lid as recommended. We don’t advise to refill more than once. If you want to refill Colad Snap Lid System, only do so if you paint in one go. If you have a certain time in between before re-using, we’d advice to use a clean snap lid.
If you have leftover paint in your paint cup, you can replace the Snap Lid by one of our Mixing Cup Lids to store the paint in the same cup you painted with. These Mixing Cup Lids offer a flat and stackable solution for storing leftover paint. If you need to store your paint for a little while and want to continue painting with the same paint cup later, you can also use our Snap Lid Sealing Cap to prevent your paint from contamination during a break.
Due to the strong pressure in vacuum systems some dust or bigger paint particles that you want to filter out are pushed through the filter by the intense pressure. Colad Snap Lid System is a gravity feed system guaranteeing all particles to be filtered out while spraying. A gravity feed system guarantees a continuous and constant material output as well, since it is based upon the original spray gun designs and engineering.
No, never take out the filter! The filter primarily prevents against pollution and particles out of the paint and makes sure you’ll always have a consistent flow and no issues with sputtering output.
No, never take the valve locker off! This unique system prevents a vacuum and guarantees a stable paint flow.
Downloads
Language
| Name | Asset Type | Language | File type | Download |
|---|---|---|---|---|
| technical-data-sheet_9370190SLSUV_LANG1.pdf | TDS | English | 682 KB | |
| product-sheet_9370190SLSUV_LANG1.pdf | Product_sheet | English | 10875 KB | |
| manual_9370190SLSUV_LANG1.pdf | Product_manual | English | 6078 KB | |
| product-sheet_9370190SLSUV_LANG4.pdf | Product_sheet | Nederlands | 10844 KB | |
| product-sheet_9370190SLSUV_LANG6.pdf | Product_sheet | Español | 10846 KB | |
| product-sheet_9370190SLSUV_LANG5.pdf | Product_sheet | Deutsch | 10850 KB | |
| product-sheet_9370190SLSUV_LANG14.pdf | Product_sheet | Italiano | 10846 KB | |
| product-sheet_9370190SLSUV_LANG11.pdf | Product_sheet | Français | 10848 KB | |
| product-sheet_9370190SLSUV_LANG18.pdf | Product_sheet | Polski | 10849 KB | |
| product-sheet_9370190SLSUV_LANG19.pdf | Product_sheet | Portuguese | 10849 KB |