HR 3000 Automatic Spray Gun Washer
Automatic spray gun washer with capacity for two spray guns. Equipped with fluid pumps, cleaning brushes and cleaning nozzle for final rinsing of spray gun with cleaning solvent. During the automatic cleaning process you can clean a spray gun manual on the working platform. The cleaning process stops automatically when you open the lid. Only driven by max. 4 bar compressed air.
Easy-to-use, fully automatic stainless steel spray gun cleaner
Automatic cleaning
This cleaner uses thinner to remove conventional paints from two spray guns at the same time. A spray gun can also be cleaned and blow dried manually.
Safe
This cleaner is a 'closed' system, meaning the amount of thinner vapour is reduced and it is therefore safer for users. The cleaning process stops automatically when you open the washer cover to ensure maximum safety. Cleaning in automatic mode takes place in a closed system and releases far less thinner vapours compared to manual cleaning.
Efficient thinner consumption
This cleaner uses reused thinner in the main cleaning process and subsequently uses only a small amount of clean thinner during the rinse to ensure lower thinner consumption.
Complete operational system, including a drip tray, blow-dry gun, 20 L container and cleaning brush.
Key features
- Automatic spray gun washer with capacity for two spray guns
- Fully pneumatic operation (up to 4 bar), no electricity required
- Integrated fluid pumps for effective distribution of cleaning solvent
- Built‑in cleaning brushes for pre‑wash and manual cleaning
- Designed for connection to central extraction to efficiently remove contaminated air and fumes
- Manual cleaning station usable during automatic cleaning cycle
- Automatic stop function when the lid is opened for added safety
- Final‑rinse cleaning nozzle for optimal spray gun finishing
- Durable, aesthetically designed stainless steel construction
- Reduces solvent waste and improves cleaning consistency
Product details
- Brand
- Hamach
- Number
- 000453
- EAN
- 8714247762189
- Width (cm)
- 84
- Height (cm)
- 158
- Depth (cm)
- 60
- Weight (kg)
- 75
- Material
- Smooth, brushed stainless steel
- ATEX-zone
- Zones 1 and 2 (CE Ex II 2G IIB T4)
- Cleaning
- Automatic and manual
- Cleaning product
- Thinner
- Drip tray
- Yes
- Recommended extraction volume
- Min. 600 m³/h
- Recommended operating pressure
- To be connected to compressed air of 4-6 bar; machine has its own pressure regulator
- Storage capacity
- Use with max. 2 x 20 L cans; 1 can for clean thinner and 1 can for dirty thinner
- Suitable for cleaning
- Conventional paints
- Suitable for fume extraction
- Yes
- Water connection
- No
- Working height (cm)
- 105
Application
-
- Open the wash reservoir cover, place the spray guns and/or flow cup at the top in the wash reservoir with the paint feed on the fixed nozzle. Make sure the gun's trigger is firmly secured with the metal clamp.
- Position the air nozzle with hose beneath the spray gun to prevent thinner from entering the air channel.
- Close the wash reservoir cover and close the HR 3000 cover.
- Set the timer. Once the timer has elapsed, the cover and wash reservoir can be opened.
- Remove the spray gun and/or flow cup, blow dry them if necessary, and you're ready to get back to work.
Frequent Asked Questions
a) The spray gun cleaner is guaranteed for a period of 12 months from date of purchase if the warranty form has been returned to EMM International BV immediately after purchase.
b) The guarantee includes free replacement or repair of spare parts with productions faults.
c) The equipment must be forwarded carriage free in original packing to HID Services in Zwolle and will be returned at costs of customer. If the service is required by a technician on location, the time spent traveling and servicing will be charged to the customer. Time deeded for repairs and costs of parts will not be charged.
d) The supplier will not be held responsible for direct or indirect damage caused by failing to follow the instructions specified in this manual – with regard to installation, operation and maintenance. The guarantee does not cover compensation of direct or indirect damage caused as a result of temporary failure/interruption.
The guarantee is valid only when the terms of payment have been met. Guarantee expires, except in the cases indicated in the contract, also in the following cases.
- When damage has arisen as a result of insufficient maintenance.
- When the spray gun cleaner has changed due to repairing without authorisation from HID Services or it is caused due to installing not original components and damage by these changes.
- When the owner does not follow the instructions in this guide.
- When corrosive solvents are used.
- Acoustic average level at the workplace LpA = 77.9 dB(A)
- Acoustic average level LpAm = 75.4 dB(A).