Foam Masking Tape
9080xx
Foam masking tape to seal apertures of cars and other vehicles, procting again sharp edges and overspray to bleed trough.
A foam masking tape that seals and protects car apertures during the repair process.
Colad Foam Masking Tape is designed to seal the apertures of cars. It protects against sharp edges and prevents overspray from bleeding through. The foam can be easily applied and guarantees a correct isolation. Does not leave any residue upon removal. Silicon free.
Key features
- Seal apertures of cars/vehicles
- Protect against sharp edges
- Prevents overspray from bleeding trough
- Easy to apply
- Guarantees a correct isolation
- Does not leave residu after removal
Product details
- Brand
- Colad
- Number
- 9080xx
Frequent Asked Questions
Colad Foam Masking Tape is especially designed to mask car apertures. It protects against sharp edges and prevents overspray from bleeding trough.
It’s essential to mask the jambs on a vehicle before repairing it to prevent them from overspray. Colad Foam Masking Tape is designed to fill up the jambs and prevents them from overspray. If you use regular masking tape for this it’s going to leave a hard edge, foam masking tape results in a soft edge.
Clean the surface before applying the Foam Masking Tape. Make sure the adhesive part of the paint faces the inside of the vehicle. Don’t stretch out the foam masking tape during application. Apply the tape all trough the aperture/jamb for complete protection.
Downloads
| Name | Asset Type | Language | File type | Download |
|---|---|---|---|---|
| technical-data-sheet_908013_LANG1.pdf | TDS | English | 453 KB |